What is what to do when toilet won't flush?

Okay, here's some information on what to do when your toilet won't flush, formatted in Markdown with the requested links:

Toilet Won't Flush? Here's What to Do

A toilet that refuses to flush can be a frustrating problem. Here's a step-by-step guide to troubleshoot and (hopefully) fix it yourself:

1. Check the <a href="https://www.wikiwhat.page/kavramlar/Water%20Supply">Water Supply</a>: Ensure the water supply valve behind the toilet is fully open. Someone might have accidentally turned it off.

2. Is there water in the <a href="https://www.wikiwhat.page/kavramlar/Toilet%20Tank">Toilet Tank</a>? If not, the fill valve may be malfunctioning. If so, proceed to the next steps.

3. Try Using a <a href="https://www.wikiwhat.page/kavramlar/Plunger">Plunger</a>: This is your first line of defense against a simple clog. Use a toilet-specific plunger (it has a flange that folds out to create a better seal). Make sure there's enough water in the bowl to cover the cup of the plunger. Plunge vigorously and repeatedly.

4. Wait and See: After plunging, give the toilet a little time to see if the water level slowly drains. If it does, the clog might be loosening. Try flushing again gently.

5. Use a <a href="https://www.wikiwhat.page/kavramlar/Toilet%20Auger">Toilet Auger</a> (aka Closet Auger): If plunging doesn't work, a toilet auger can break up or retrieve the clog. Carefully insert the auger into the drain opening and rotate it to break up the clog or hook onto it.

6. Check for <a href="https://www.wikiwhat.page/kavramlar/Flapper">Flapper</a> Problems: The flapper is the rubber or silicone valve at the bottom of the tank. Make sure it's sealing properly. If it's cracked, warped, or not seating correctly, the toilet might not flush with enough power. You can usually replace the flapper easily.

7. Inspect the <a href="https://www.wikiwhat.page/kavramlar/Lift%20Chain">Lift Chain</a>: The chain connects the flush lever to the flapper. If it's broken, too loose, or tangled, the flapper won't lift properly. Adjust or replace the chain as needed.

8. Check the <a href="https://www.wikiwhat.page/kavramlar/Rim%20Jets">Rim Jets</a>: These small holes under the rim of the bowl help direct water into the bowl during the flush. If they're clogged with mineral deposits, the flushing action will be weak. You can often clean them with a wire or small brush.

9. When to Call a <a href="https://www.wikiwhat.page/kavramlar/Plumber">Plumber</a>: If you've tried these steps and the toilet still won't flush, it's time to call a professional plumber. There could be a more serious blockage further down the drain line, or a problem with the toilet's internal components that requires specialized knowledge.